Before installation, remove
approximately 2" of masking from all sheet
edges.
Remove masking immediately
after installation.
Marklon PC Solid Sheet
can be cold-formed by:
* a/b >= 2
* Ø < 90°
* R >= 180t
INSTALL THIS SIDE UP:
This Marklon sheets is UV protected on this side
only and it must be installed this side up. Remove
all packing firms immediately after installation.
STORAGE: Sheets stored
outdoors should be protected from sunlight and rain
by an appropriate opaque waterproof cover, and away
from chemical contact.
CUTTING METHOD: Using
circular saw blade.
Notes:
Marklon Polyglass Polycarbonate Solid Sheets is covered with
a layer of protection foil to avoid scratches during transportation
and installation. The masking foil can be easily removed by
applying kerosene with a soft cloth, followed immediately
with soap and water cleaning.
PLEASE DO NOT USE ABRASIVE MATERIAL, ALKALINE OR ALCOHOLIC
AGENT FOR CLEANING.
